Magnum Energy ME-ARC Remote - Manual (Page 4)

Magnum Energy, Inc. PN: 64-0030-040 Rev C Page 4 of 4
* 12-volt values shown; for 24-volts systems - multiply by 2 and for 48-volt systems - multiply by 4.
** These settings return to the factory default setting when power to the remote is removed.
[F] Features added to Rev 4.0.
ME-ARC (Rev 4.0) Compatibility Matrix Notes:
[1] Will not work with MM/MM-E/MM-AE/MMS/MMS-E models.
[2] AC Couple Mode activates when Battery Type = Custom with MS-PAE Series ≥Rev 4.1 or MS/MS-PE series ≥5.0.
[3] The AC output volts/frequency are only accurate when used with MS, MS-PE, MS-PAE or MSH Series inverters.
[4] The AC amps are only accurate and may not be shown unless connected to MS-PE, MS-PAE or MSH Series
inverters.
[5] Level 2 and 3 inverters can be used, but:
Level 2 inverters are limited from 1.0 hour to 4.5 hours,
Level 3 inverters Level 3 inverters ≥Rev. 4.1 (and MMS Rev 1.5) are limited from 1.5 hours to 6.5 hours;
Any setting outside these limited ranges is not recognized and reverts to the inverter's default absorption time (2.0
hours).
[6] Requires ≥Level 4 to display.
[7] SOC features require the ME-BMK (Battery Monitor Kit) to be installed.
[8] To manually turn the generator "ON" with the remote, ME-AGS-N rev 5.0 or higher is required.