LW Scientific BioVID - Manual (Page 9)

SPECIAL MENU
Gamma
Color Adj.
Sharpness
LOW
Contrast OFF
Brightness
Flickerless
ON
Preset
End
P. 770.270.1394 F. 770.270.2389 865 Marathon Parkway Lawrenceville GA 30045
Special Menu Continued
Lens Installation
Position the cursor at FLICKERLESS and press the left or right
direction button for setting the flickerless on.
Press the left or right button again, the flickerless setting is
return to off.
If the camera is used with 50 Hz fluorescent lighting, and there
is flickering on the monitor. In this case, set the FLICKERLESS
mode to ON. Otherwise it should be set to off.
Flickerless
9
1
2
When position the cursor at PRESET, “ Press SET to Factory
Set” message will be displayed on the screen.
Position the cursor at PRESET and press the Set button to
perform the preset function. “Factory Setup Completed “
message will be displayed on the screen and the message
is extinguished automatically in about 5 sec.
This function is useful when the camera is used the frequently
changed setup conditions. Preset mode provide the best
image under the normal condition by factory setup.
Preset
1
2