LW Scientific MiniVID USB User Manual
Page 3
P. 770.270.1394
F. 770.270.2389
865 Marathon Parkway Lawrenceville GA 30046
Open the lid, correct the unbalanced load. Close the lid
and `reset the centrifuge’ by turning unit `Off’ and ‘On’
using the On/Off switch located on the rear side of the
centrifuge.
Next, click “Install Application.” Follow the prompts in the Setup Wizard.
Select the location in which you want the software installed. Click “Install.”
3
4
When installation is completed, the following window will appear. Click “Finish.”
5
White balance: Empty the microscope stage and turn on the light so the MiniVID is viewing an empty
illuminated field. Then go to White Balance and click the “White Balance” button.
Most other settings are set to “auto” or to the best setting. Settings for Frame Speed Level or Flip Horizon-
tal/Vertical can be adjusted if needed.
Capture the image or several images by click on the “Snap” button. Capture videos by clicking on the
Record button once to begin records and then a second time to end recording.
Tabs for the captured images will appear across the top of the live view window. You can then rename
and save these to the appropriate folder on your computer. The images will appear behind the live
view screen. Click on the first tab, labeled “Video” and then the camera number, to return to the live
view screen.
Optional Live Video Screen:
If a full-screen image is desired, select the “View” on the bar across the top of the window, and when
the drop down menu appears, select the “Full Screen” option.
7
8
9