Logitek Electronic Systems AE-32 Audio Engine - Manual (Page 45)

Pinout Data
Logitek Audio Engine Reference Manual 43
AE-C6
The AE-C6 contains 8x RJ45, 1x DB9, 1x DB25 and 1x DB37 connectors. The eight RJ45s are from
bottom to top, Port 1 to 8. The DB9 is for External Sync, the DB25 is for GPI outputs and the DB37
is for GPI outputs and Inputs. All DB connectors are female and require male plugs.
Port 1 to 6 – RJ45 (Surface)
Pin Cable Color Connection
1 White/Orange Cue -
2 Orange Cue +
3 White/Green RS-485 Tx -
4 Blue RS-485 Rx -
5 White/Blue RS-485 Rx +
6 Green RS-485 Tx +
7 White/Brown No connect
8 Brown Ground
Port 7 to 8 – RJ45 (PC)
Pin Cable Color Connection
1 White/Orange No connect
2 Orange RS-232 Tx
3 White/Green RS-485 Tx -
4 Blue RS-485 Rx -
5 White/Blue RS-485 Rx +
6 Green RS-485 Tx +
7 White/Brown RS-232 Rx
8 Brown Ground
 TIP: Pre-wired CAT-5 cables may swap the orange and green pairs.
 TIP: For the PC connection on Ports 7 & 8 Use either RS-232 or RS-485, not both.
GPI Output – DB25
Pin Connection Pin Connection
1 Relay 1+ 14 Relay 1-
2 Relay 2+ 15 Relay 2-
3 Relay 3+ 16 Relay 3-
4 Relay 4+ 17 Relay 4-
5 Relay 5+ 18 Relay 5-
6 Relay 6+ 19 Relay 6-
7 Relay 7+ 20 Relay 7-
8 Relay 8+ 21 Relay 8-
9 Relay 9+ 22 Relay 9-
10 Relay 10+ 23 Relay 10-
11 Relay 11+ 24 Relay 11-
12 Relay 12+ 25 Relay 12-
13 No connect
Ext Sync – DB9
Pin Connection
1 Out +
2 Out -
3 Ground
4 No connect
5 No connect
6 In +
7 In -
8 Ground
9 No connect
GPI Output & Input – DB37
Pin Connection Pin Connection
1 GPI In 1 20 Ground
2 GPI In 2 21 Ground
3 GPI In 3 22 Ground
4 GPI In 4 23 Ground
5 GPI In 5 24 Ground
6 GPI In 6 25 Ground
7 GPI In 7 26 Ground
8 GPI In 8 27 Ground
9 GPI In 9 28 Ground
10 GPI In 10 29 Ground
11 GPI In 11 30 Ground
12 GPI In 12 31 Ground
13 GPI In 13 32 Ground
14 GPI In 14 33 Ground
15 GPI In 15 34 Ground
16 Relay 13+ 35 Relay 13-
17 Relay 14+ 36 Relay 14-
18 Relay 15+ 37 Relay 15-
19 No connect