Logitek Electronic Systems AE-32 Audio Engine - Manual (Page 13)

System Components
Logitek Audio Engine Reference Manual 11
LCD Display
The Audio Engine has an LCD screen below the lower Power Supply.
The LCD screen displays such information as the config file loaded on the Engine, the Audio Engine
number (useful with multiple Engine configurations), and the current sampling rate. In addition, the
display shows the type of reset that the Engine last had. This will be Quick, Soft or Full.
AE-C2 Controller
The LCD top line displays:
 RX= followed by 1, 2, 3 or 4 as data is received from ports
 32, 44 or 48 indicating the sample rate
 The last type of reset ( Quick in this example)
The LCD bottom line displays:
 The configuration file name (first 14 chars)
 The Audio Engine number (far right)
AE-C6 Controller
The LCD top line displays:
 AE-C6 firmware version ( v3.71 in this example)
 32, 44 or 48 indicating the sample rate
 Lk if external sync is present (not present in this example)
 The last type of reset ( Full in this example)
The LCD bottom line displays:
 The configuration file name (first 14 chars)
 The Audio Engine number (far right)
The AE-C6 Controller has individual TX & RX LEDs on each port.