Elation Professional Professional Model Impression Mounting Light - Manual (Page 15)

©Elation Professional® 15 impression™
Side Mounting
To properly operate the Impression in a sidewise position, it is necessary to use the optional
side-mounting bracket assembly. This bracket assembly uses two half couplers and allows a
concentric position between two truss bars. Never mount the fixture on its’ side using the
single coupler method described in the “Clamp Mounting” section on the previous page as it
may damage the base. The side-mounting assembly was specifically designed to cope with
excessive torque that occurs when the fixture is mounted on its’ side. To attach the
side-mounting bracket use the same Camlock mounting points that are available for the floor
stand. Line up the Camlock fasteners with Camlock mounting points on the base and turn
the two fasteners 90° to lock them in place. To release the Camlock repeat the same action
in reverse. See the illustration on the next page for details on the floor stand.