Elation Professional Professional Model Impression Mounting Light - Manual (Page 13)

©Elation Professional® 13 impression™
Never stand directly below the device when mounting, removing, or servicing the fixture.
Overhead mounting requires extensive experience, including amongst others calculating
working load limits, a fine knowledge of the installation material being used, and periodic
safety inspection of all installation material and the fixture. If you lack these qualifications, do
not attempt the installation yourself. Improper installation can result in bodily injury.
Be sure to complete all rigging and installation procedures before connecting main power.
Refer to regulations BGV C1 (formerly VBG 70) and DIN VDE0711-217
for proper installation in Europe. To ensure proper installation, only
qualified staff should attempt installation.
Mounting points
Various mounting kits are available for the Impression™. These kits will provide a proper
and secure means to install the fixture in different positions. The fixture was designed to
accept the available mounting kits, please do not attempt to mount the fixture by any other
means than those describe in the following sections of this manual. Please also note that the
fixture is clearly marked with a “FRONT” orientation; this will ensure a universal orientation
when mounting several fixtures.