Bang & Olufsen BeoPlay V1 User Guide User Manual
Page 8
8
>> Connections
Disconnect the television, the computer
and all equipment connected to the
television and computer from the mains
before you connect additional
equipment.
Connect a computer
> Using the appropriate type of cable,
connect one end to the DVI or HDMI
output socket on your computer, and the
other end to an HDMI IN socket on the
television.
> If you use the DVI output socket on the
computer, use the appropriate cable and
connect the digital sound output on the
computer to the S/P-DIF IN socket on the
television to hear sound from the
computer in the speakers connected to
the television.
> Reconnect the television, the computer,
and all connected equipment to the mains.
Remember, the computer must be
connected to a grounded wall outlet as
specified in its setting-up instructions.
Connect an analogue source
Connect a computer
You can connect one analogue source,
such as a game console or video tape
recorder. To configure connected
equipment to the television,
Disconnect all relevant systems from the
mains before you connect additional
equipment.
Connect an analogue source
> Connect the cable to the appropriate
socket on the equipment you wish to
connect.
> Run the cable to the AV IN socket on the
television.
> Reconnect the television and the
connected equipment to the mains.
> To enable remote control operation of a
non-Bang & Olufsen analogue source,
connect an IR-transmitter to one of the
PUC sockets and attach it to the IR-
receiver of the analogue source.
page 10 for more information on IR-
> Follow on-screen instructions to configure
the source.
Different adaptors and maybe also cables
are needed. Cables and adaptors are
available from your retailer.