Bang & Olufsen BeoPlay V1 User Guide - Manual (Page 26)

26
See two sources at the same time
Your Beo4/Beo6 remote control
gives you access to a dual-screen
function for viewing two sources
at the same time. You can bring
up a video source and an audio
source at the same time. For
example, you can view a video
playback from a USB source and
a TV programme from your set-
top box at the same time,
provided that the selected sources
are available in your system.
There are some limitations when using
the Picture-and-Picture (P-AND-P)
function since some source combinations
may not be possible. For example, you
cannot watch two HDMI sources or two
coded channels at the same time. When
an invalid combination is selected, an on-
screen message appears on the television
screen.
To view a source registered in the
SOURCE LIST SETUP menu as V.AUX,
such as a set-top box, press LIST and use
the navigation button up or down until
P-V.AUX is shown in the Beo4 display.
Volume adjustment always affects picture A,
while other operations, such as selecting
channels, affect picture B. Selecting a new
source cancels P-AND-P viewing.
While watching, for example,
television …
Beo4 operation …
Press to bring up P-AND-P
Press, for example, H.MEDIA
to select the source to view on
the right side of the screen (B)
Press to swap the left picture
and right picture
Press to bring up P-AND-P to
switch between small and large
for the left and right picture
Beo6 operation …
Press to bring up the P-and-P
display
Press, for example, H.Media to
select the source to view on the
right side of the screen (B)
Press to swap the left picture
and right picture
Press to switch between small
and large for the left and right
picture
To leave the dual-screen function …
Press to leave the function and
return to normal viewing of the
source on the left side of the
screen (A) or simply select a
source
A B
A B
LIST
P-AND-P
H.MEDIA
MENU
0
LIST
P-AND-P
BACK
P-and-P
H.Media
Swap
Size