Bang & Olufsen BeoPlay V1 User Guide - Manual (Page 7)

7
>> Connections
Connect digital sources
Connect up to five external HDMI
sources, such as a set-top box, computer
or game console. All connected
equipment to the television must be
configured,
see page 12 .
Depending on the type of equipment you
connect to the television, different cables
and maybe also adaptors are needed. If you
have more than two types of equipment that
need a PUC socket, you must buy an extra
PUC cable. Cables and adaptors are available
from your retailer.
Connect a set-top box
> Connect the cable to the appropriate
socket on the set-top box.
> Run the cable to an HDMI IN socket on the
television.
> To enable remote control operation of the
set-top box, connect an IR-transmitter to
one of the PUC sockets and attach it to
the IR-receiver on the set-top box.
See page 10 for more information on IR-
transmitters
.
> Follow on-screen instructions to configure
the source.
Connect a DVD/Blu-ray player
> Connect the cable to the appropriate
socket on the DVD/Blu-ray player.
> Run the cable to an HDMI IN socket on the
television.
> To enable remote control operation of the
DVD/Blu-ray player, connect an IR-
transmitter to one of the PUC sockets and
attach it to the IR-receiver on the DVD/
Blu-ray player.
See page 10 for more
information on IR-transmitters .
> Follow on-screen instructions to configure
the source.
Connect a game console
> Connect the cable to the appropriate
socket on the game console.
> Run the cable to an HDMI IN socket on the
television.
> To enable remote control operation of the
game console, connect an IR-transmitter
to one of the PUC sockets and attach it to
the IR-receiver on the game console.
See page 10 for more information on IR-
transmitters
.
> Follow on-screen instructions to configure
the source.* 1
Connect a camera
> Connect the cable to the appropriate
socket on the camera.
> Run the cable to an HDMI IN socket on the
television.
> Follow on-screen instructions to configure
the source.
1 *When selecting GAME CONSOLE as source,
the picture mode GAME is activated as default
setting. You can change this setting temporarily
in the PICTURE menu, see page 23 .
Example of connected digital sources.
5 4 3 2 1
CTRL 1
S/P-DIF
IN HDMI IN
AV
IN
CTRL 2
PUC 2 A+B
CTRL 3
PUC 1 A+B
Set-top box DVD/Blu-ray player
Computer Game console Camera