Bang & Olufsen BeoPlay V1 User Guide - Manual (Page 6)

6
Depending on your tuner options, you may
have either one or no satellite input.
If you have more than one satellite dish, you
must also use a multi DISEqC switch. For
more information, contact your retailer.
Loudspeakers
Use Bang & Olufsen BeoLab speakers.
Cables are available from your Bang &
Olufsen retailer.
See page 9 .
Equipment with HDMI™ output
Equipment with HDMI output such as a
set-top box can be connected to any
available HDMI IN socket in the television.
For more information on how to set up
connected equipment,
see page 12 .
A configured source can be selected with
the configured source button or in the
SOURCE LIST. If the television detects an
unconfigured source, you are asked to
choose between doing nothing, showing
the source or configuring it.
Connected equipment can be operated with
its own remote control or you may
download a PUC table to use a Beo4/Beo6
remote control,
see page 12 .
The connection panel on your
television allows you to connect
signal input cables as well as a
variety of extra equipment, such
as a Blu-ray player.
Any equipment you connect to
these sockets can be registered
in the SOURCE LIST SETUP menu.
For more information,
see page
12 .
Before you connect any equipment
to your television, remember to
disconnect the television from the
mains. Except when connecting a
source to the HDMI IN or USB socket.
Depending on the type of equipment
you connect to the television,
different cables and maybe also
adaptors are needed. Cables and
adaptors are available from your
retailer.
Connections
AERIAL
SATELLITE
PL 1–3
PL 1–3
If you need to reset your television to default
settings, then bring up the REGIONAL
SETTINGS menu and select another country.
You will be asked to confirm the reset. All
settings will be deleted and you must go
through first-time setup, follow on-screen
instructions.