Lanner FW-8759 - Manual (Page 7)

1
Introduction
Network Application Platforms
Chapter 1
Chapter 1:
Introduction
Thank you for choosing the FW-8759. The new system is
powered by the newest Intel Core Processors, codenamed
Shark Bay, with the Intel C226 Series chipset. It supports
up to 32GB of DDR3 system memory at 1600MHz on dual-
channel DIMM banks.
The FW-8759 is equipped with advanced I/O capacity
which includes an RJ-45 console port, two PCIex8 (PCIe
Generation 3.0) golden finger connected directly to the
CPU for front Ethernet module as well as rear expansion, 3
Serial-ATA ports (comply with SATA Standard 3.0 or 2.0), a
CompactFlash slot, and an OPMA slot, etc.
The system also leverages Intel Active Management
Technology (Intel AMT), a hardware-based manageability
solution that offers the following management benefits:
Out of Band (OOB) access through the iAMT port •
(LAN8) allows remote management of PCs regardless
of system power or OS state
Remote troubleshooting and recovery significantly
•
reduces desk-side visits and increases IT efficiency
Proactive alerting and event logging decreases
•
downtime and minimizes time to repair
Remote HW and SW asset tracking eliminates time-
•
consuming manual inventory tracking an reduces
asset accounting costs
The onboard Ethernet ports be configured with Lanner
Generation 3 bypass, which is a proprietary bypass
technology designed by Lanner to support uninterrupted
network connection even when a system is turned off
or operating system is not functioning. The system can
also accommondate one Ethernet module to provide
additional 2 10GbE or 8 GbE LAN ports.
Please refer to the chart below for a summary of the
system’s specifications.
System Specifications
Form Factor Rackmount 1U
Platform
Processor Options
4th Generation Intel® Xeon
E3-1200 v3 or Core
TM i7/i5/i3 series
processor with C226 (Codenamed
“Denlow”)
Chipset C226
OS Support
Windows 7,8,2000, XP, Vista, Server
2008, 2012, Linux Kernel 2.6 or
above
BIOS AMI BIOS 64Mb
System Memory
Technology
Dual-channel DDR3/DDR3L
1066/1333/1600 MHz, un-buffered,
non-ECC or ECC
Max. Capacity 32 GB
Socket 2 x 240-pin DIMM
Storage
HDD Bays
2 x 2.5 HDD/SSD kit (1x3.5”
reserved)
CF/SD 1 x CF card Type II
Networking
Ethernet Ports
8 x GbE RJ-45 onboard, Maximum
up to 16 ports (with LAN module)
Bypass 3 pair G3 LAN Bypass (optional)
Controllers 1x Intel i217, 7 x Intel i210AT
Ethernet Modules 1
Management Port 1x GbE RJ45
I/O Interface
Reset Button 1 reset button
Console 1 x RJ45
USB 2 x USB 2.0
IPMI via OPMA slot By project
Display N/A
Expansion
PCIe
1 x PCIE x8 expansion for NIC
Module, 1 x Low-profile PCI-E *8
(Optional)
PCI N/A
Cooling
Processor CPU heatsink with fan duct
System
3 x cooling Fan with smart fan
control
Environmental
Parameters
Temperature,
ambient operating /
storage
0 ~ 40º C / -20~70º C
Humidity (RH),
ambient operating
/ ambient non-
operating
5~90%, non-condensing / 5~95%,
non-condensing
Miscellaneous
LCD Module 2 x 20 LCM with keypad
Watchdog Yes
Internal RTC with Li
Battery
Yes
Physical
Dimensions
Dimensions
(WxHxD)
438 x 44 x 415 mm
Weight 10 Kg
Power
Type / Watts 300W ATX Power Supply Units
Input AC 90~264 V @47~63 Hz
Approvals and Compliance CE Class A, FCC Class A, RoHS