Lanner FW-8759 - Manual (Page 10)

4
Introduction
Network Application Platforms
Chapter 1
F7 LAN7 IPMI Port (provided by Intel i210) 1
This FastEthernet port can be connected for configuration or troubleshooting purpose. Conformity with IPMI (Intelligent
Platform Management Interface) can be implemented through OPMA on this interface. It also supports Preboot eXecution
Environment (PXE) (This feature can be enabled or disable in the BIOS; the default is disabled).
F8 Intel iAMT Management Port (provided by Intel i217)
This port equips with Intel iAMT, which allows IT to better discover, heal, and protect their network computing assets. To
enter the Intel AMT setup menu, press CTRL-P when prompted during system boot process. It is also a serial over LAN (SOL)
port whose console redirection parameters can be configured in the BIOS menu. (You don’t need to enable the iAMT in the
BIOS; however, you will need to download the Intel AMT driver in order to emulate serial communication over a network
connection. The terminal parameters can be altered in the BIOS menu; go to BIOS -> Advanced -> Serial Port Console
Redirection -> COM1->select enabled first and then select ->Console Redirection Settings > [115200, 8 , n ,1 ]) This port also
supports Preboot eXecution Environment (PXE) (This feature can be enabled or disable in the BIOS; the default is disabled)
F9 Swappable Ethernet Modules
Note:
The IPMI port is optional. 1.
The system can accommodate various Ethernet modules with different port number and speed. For more 2.
information, visit the Lanner product website at http://www.lannerinc.com/products/x86-network-appliances/nic-
modules/
Slim Module Ports Chipset Bypass
NCS2-IGM428A 4 GbE RJ45 Intel i350AM-4 2 pairs Gen3
NCS2-IGM428B 4 GbE RJ45 Intel i350AM-4 N/A
NCS2-ISM405A 4 GbE SFP Fiber Intel I350-AM4 2 pairs
NCS2-ISM406A 4 GbE SFP Fiber Intel I350-AM4 N/A
NCS2-ISM802A 8 GbE SFP Fiber Intel i350AM-4 N/A
NCS2-IXM205A 2 10GbE SFP+ Intel 82599 1 pair Gen3
NCS2-IXM405A 4 10GbE SFP+ Intel 82599 N/A