Lanner FW-5330 - Manual (Page 34)

31
Driver Installation
Appendix A
Network Application Platforms
Linux
Follow these instructions to install the Realtek® LAN
controller base driver for the Red Hat® and Linux operating
system.
Insert the Drivers and User’s Manual CD to the USB- 1.
Optical drive and mount the optional drive in the
Linux platform.
Copy the archive driver in BZ2 file from the Drivers and
2.
User’s Manual CD to the directory of your local hard
disk. The Realtek® LAN driver for Linux OS is located in
the following directory:
\Driver\RTL8111_Driver\LINUX. The name format of
driver file is “r8168-.tar.bz2”.
Untar/unzip the archive file: 3.
tar xvfj .tar.bz2
Compile the driver module by typing the following 4.
command:
make install
The binary will be installed as: 5.
/lib/modules//kernel/drivers/net/
The install locations listed above are the default
locations. They might not be correct for certain Linux
distributions.
Assign an IP address to the interface by entering the 6.
following, where is the interface number:
ifconfig eth
Verify that the interface works. Enter the following, 7.
where is the IP address for another
machine on the same subnet as the interface that is
being tested:
ping
Note: For LAN drivers installing on other operating
systems, visit Realtek’s download page at
h t t p : / / w w w. re a l t e k . c o m . t w / D o w n l o a d s /
downloadsView.aspx?Langid=1&PNid=13&PFid=5
&Level=5&Conn=4&DownTypeID=3&GetDown=fa
lse.
The AMD Processor Driver Installation
This driver allows the system to automatically adjust the
CPU speed, voltage and power combination to match the
instantaneous user performance need. This package is a
user friendly localized software installation of the driver
designed for end-users.
To install this driver, double click on the Setup icon in your
Driver and Manual CD.
VGA Driver Installation (for models with
a customization chipset which has an
integrated GPU)
This section provides the instructions on how to install
VGA adapter drivers.
Restart the computer, and then log on with 1.
Administrator privileges.
Insert the Drivers and User’s Manual CD to the USB-
2.
Optical drive.
Browse the contents of the Drivers and User’s Manual
3.
CD under the directory: \ Driver.
Execute “SETUP.exe” of Catalyst Install Manager by
4.
double-clicking the icon.