Lanner FW-5330 - Manual (Page 27)

24
Bios Settings
Chapter 4
Network Application Platforms
Onchip IDE Mode
Selection Description
Legacy IDE In Legacy mode the SATA controllers use
dedicated IRQs that cannot be shared
with other device.
Set this option to Disabled if you wish
to install operating systems that do not
support Native mode, e.g. Windows 9X/ME.
(Default)
Native IDE
Mode Enabled Allows the SATA controllers to operate
in Native IDE mode.
Enable Native IDE mode if you wish to install
operating systems that support Native mode,
e.g. Windows XP/2000.
USB Configuration
This menu allows you to configure your USB controllers.
Enable all USB device
Item Selection
Enable or Disable
USB Controller(s) Set this value to enable or disable USB
controllers