Ion Science TVOC - Manual (Page 31)

TVOC MANUAL Ion Science Ltd
Page 31 of 32
Unrivalled Detection. www.ionscience.com
Manual log
Manual Version Amendment Date updated Instrument
Firmware
PC
Software
TVOC Manual
V2.1 Diagram 5.2.1 updated on
page 11 31/3/08 V3.09 N/A
TVOC Manual
V2.2 Diagram updated on page
15 21/4/08 V3.09 N/A
TVOC Manual
V2.3 Declaration on conformity
change only 27/11/08 V3.09 N/A
TVOC Manual
V2.4 Log added to back of manual 09/01/09 V3.09 N/A
TVOC Manual
V2.5 Diagnostics added and P&F
barrier changed 20/02/09 V3.09 NA
TVOC Manual
V2.6 TVOC firmware modified to
allow customers to calibrate
using an alternative
concentration. Aldo
improved the description of
the F2 fault condition. (P6,
P17, P24) 22/07/09 V3.10 N/A
TVOC Manual
V2.7 TVOC ATEX certification to
allow zone 2 installation
without safety barriers. (P12,
P13, P26) 1.09.09 V3.10 N/A
TVOC Manual
V2.9 Inclusion of Cable gland in
kit, so addition of details
regarding cable gland
selection and use
Change to EMC details as
result of testing 23.3.10 V3.10 N/A
TVOC Manual
V3.0 Warranty Cover updated
Declaration of Conformity
updated
Contents page updated
Instrument Warranty and
Service updated 22/07/10 V3.10 N/A
TVOC Manual
V3.1 Addition of fault output level
on page 9, Calibration fault
LED indication changed on
Page 20, 22 ,23 07/08/10 V3.25 N/A
TVOC Manual
V3.1 Addition of F3 and F4 fault to
diagnostics section pages
27, 28, & 29. Additional
notes in TVOC setup,
selector pin section page 11 08/09/10 V3.25 N/A
TVOC Manual
V3.1 Addition wire C.S.A areas
accepted on pages 14 & 30
Mounting diagram 5.2.1 on
page changed to general
assembly drawing 06/10/10 V3.25 N/A
TVOC Manual
V3.2 Page 9. Text amended to
emphasise when TVOC is
un-calibrated. 06/11/10 V3.25 N/A
TVOC Manual
V3.4 Page 14. Barrier part
numbers removed 20/12/10 V3.25 N/A