Yaskawa MP900 Series Machine Controller New Ladder Editor - Manual (Page 191)

6.4 QUICK REFERENCE
6-17
6
6.4.4 The definition data is added from the ladder editor.
The definition data can be added from the ladder program screen.
1. Select the symbol or address of instruction in a ladder program.
2. Select Edit (E) - Add address to quick reference (Q) of the menu or right-click and
select Add address to quick reference (Q) from the menu.
3. The specified data is added to the active watch page.
The menu is disabled during the following conditions.
• Neither Symbol nor Address of data is selected.
• The selected symbol data is not effective.
• The selected address data is not effective.
INFO