Yaskawa BACnet MS/TP SI-B3/V - Manual (Page 39)

Object ID Object Name
Modbus
Address
Precision Range Units PV Access
AV16 Drive Status 2 002CH XXXXX – – R
AV17 MF Output Status 002DH XXXXX – – R
AV18 DC Bus Voltage 0031H XXXX.X – Volts R
AV19 PI Feedback Level 0038H XXXX.X – % R
AV20 PI Input Level 0039H XXXX.X – % R
AV21 PI Output Level 003AH XXXX.X – % R
AV22 CPU Software 004DH XXXXX – – R
AV23 Flash Number 005BH XXXXX – – R
AV24 Comm Error Detail 003DH XXXXX – – R
AV25 kVA Setting 0508H XXXXX – – R
AV26 Control Method 0102H XXXXX – – R
AV27 Accel Time 0200H
XXXX.X
(when
C1-10 = 1)
XXX.XX
(when
C1-10 = 0)
0.0 to 6000.0
(when
C1-10 = 1)
0.00 to
600.00
(when
C1-10 = 0)
Sec W
AV28 Decel Time 0201H
XXXX.X
(when
C1-10 = 1)
XXX.XX
(when
C1-10 = 0)
0.0 to 6000.0
(when
C1-10 = 1)
0.00 to
600.00
(when
C1-10 = 0)
Sec W
AV29
<1> Parameter Number – XXXXX 0 to FFFFH – W
AV30
<1> Parameter Data – XXXXX 0 to FFFFH – W
AV31 Not Used – – – – –
AV32 Not Used – – – – –
AV33 Drive kWH
0x005C and
0x005D
XXXXXXX
.X
0.0 to
32767999.9
kWH R
AV34 Not Used – – – – –
<1> Refer to Accessing Drive Parameters and the Enter Command on page 43 for an explanation of how to read
and write drive parameters not listed in the analog or binary objects.
9 BACnet Objects Supported
YASKAWA TOEP YAICOM 19A V1000 Option BACnet MS/TP SI-B3/V Installation & Technical Manual 39