Yaskawa MP2600iec - Manual (Page 28)

7.1 Battery Installation
26
Battery Holder Installation Instructions:
1. Remove the plastic case from the
controller by pressing the tabs at the
top and bottom.
2. Insert the tab of the metal plate
into the last vent slot on the bottom
front of the case as shown.
3. Line up the hole in battery holder
with the hole in the metal plate and
secure the battery holder with the
screw provided.
4. Attach the extension cable to the
battery and place the battery into the
battery holder with the cable facing
forward.
5. Attach the plastic case to the
controller.
6. Plug the battery extension cable
into the battery connector (CN14).