Yaskawa BACnet MS/TP - Manual (Page 9)

3 Receiving
Please perform the following tasks upon receipt of the option:
• Inspect the option for damage. Contact the shipper immediately if the option appears
damaged upon receipt.
• Verify receipt of the correct model by checking the model number printed on the name
plate of the option package.
• Contact your supplier if you have received the wrong model or the option does not function
properly.
u Option Package Contents
Description
Option PCB
PN: UTC00043o
Ground
Wire
Screws (M3) LED Label
Installation
Manual
–
NS MS
TX RX
MANUAL
Quantity 1 1 3 1 1
u Tools Required for Installation
• A Phillips screwdriver (M3 metric/#1, #2 U.S. standard size) is required to install the option
and remove drive front covers. Screw sizes vary by drive capacity. Select a screwdriver
appropriate for the drive capacity.
• Diagonal cutting pliers. (required for some drive models)
• A small file or medium grit sandpaper. (required for some drive models)
• A straight-edge screwdriver (blade depth: 0.4 mm, width: 2.5 mm) is required to wire the
option terminal block.
Note: Tools required to prepare option networking cables for wiring are not listed in this manual.
3 Receiving
YASKAWA TOEP YEACOM 08A A1000 Option BACnet MS/TP SI-B3 Installation & Technical Manual 9