Yaskawa BACnet MS/TP - Manual (Page 17)

A
C
NS MS
TX RX
Figure 4 Apply the LED Label
Connecting Option and Ground Wire
1.
Insert the option (M) into the CN5-A connector (K) located on the drive and fasten it
using one of the included screws (F).
NS MS
K
L
F
M
TX RX
Figure 5 Insert the Option
5 Installation Procedure
YASKAWA TOEP YEACOM 08A A1000 Option BACnet MS/TP SI-B3 Installation & Technical Manual 17