Yaskawa SI-EP3 PROFINET Installation - Manual (Page 49)

8 Troubleshooting
YASKAWA TOEP YEACOM 07A 1000-Series Option PROFINET SI-EP3 Installation Manual 49
■ Option Compatibility
A limited number of options may be simultaneously connected to the drive depending on the
type of option. Refer to Table 13 for more information. More details can be found in the
Options and Peripheral Devices chapter of the drive Technical Manual.
Table 13 Option Installation Compatibility
Option
<1> When installed in CN5-A, the AI-A3 and DI-A3 options can be used to set the frequency reference or replace the
drive analog inputs with higher resolution. When installed in CN5-B or CN5-C, these options can only be used for
monitoring; their input levels will be displayed in U1-17 or U1-21 to U1-23.
<2> Use the CN5-C connector when connecting only one option to the drive; use both CN5-B and CN5-C when
connecting two options.
Connector Number of Possible Options
SI-C3, SI-N3, SI-P3, SI-S3, SI-EP3, SI-EN3,
SI-EM3
<1>
CN5-A 1
PG-B3, PG-X3 CN5-B, C 2 <2>
DO-A3, AO-A3, AI-A3, DI-A3 CN5-A, B, C 1