beautypg.com

Connecting the 230 v circuit, Connecting the 415 v circuit – SMA VOLTAGE STABILIZER User Manual

Page 22

background image

5 Electrical Connection

SMA Solar Technology AG

22

Ukonstanter-IEN103610

Installation Guide

Connecting the 230 V Circuit

1. Strip the cable insulation.
2. Insert a screwdriver into the square-shaped opening next the terminal and open the terminal lock

by pressing it.

3. Connect the cables to the terminals. Use wire

sleeves for this.

4. Pull the screwdriver out of the terminal.
5. Tighten the cable screw connections.

Connecting the 415 V Circuit

1. Strip the cable insulation.
2. Insert a screwdriver into the square-shaped opening next the terminal and open the terminal lock

by pressing it.

3. Connect the cables to the terminals. Use wire

sleeves for this.

4. Pull the screwdriver out of the terminal.
5. Tighten the cable screw connections.

SMA

SMA

See also other documents in the category SMA Equipment: