SMA VOLTAGE STABILIZER - Manual (Page 11)

SMA Solar Technology AG 4 Mounting
Installation Guide Ukonstanter-IEN103610 11
4 Mounting
4.1 Choosing an Installation Site
Requirements:
☐ Installation site is located inside a closed building.
☐ The foundations must be level and solid.
☐ The installation site is not in close proximity to a source of heat.
☐ Minimum clearances have been observed.
Minimum Clearances:
Figure 3: Minimum clearances between the voltage stabilizer and non-electronic components in its close proximity.
Figure 4: Minimum clearances between the voltage stabilizer and electronic components in its close proximity.
100 mm
100 mm
500 mm
500 mm