SMA VOLTAGE STABILIZER - Manual (Page 21)

SMA Solar Technology AG 5 Electrical Connection
Installation Guide Ukonstanter-IEN103610 21
Procedure:
• Insert the cables into the inverter (see inverter documentation).
• Connect the temperature monitoring.
• Connect the 230 V circuit.
• Connect the 415 V circuit.
Connecting the Temperature Monitoring
1. Strip the cable insulation.
2. Insert a screwdriver into the square-shaped
opening next to the terminal and open the terminal
lock by pressing it.
3. Connect the cables to the terminals. Use wire
sleeves for this.
4. Pull the screwdriver out of the terminal.
5. Tighten the cable screw connections.
SMA