SMA SB 2000HF-US Installation - Manual (Page 26)

Disassembly SMA America, LLC
26 FMK20-30HFUS-eng-IUS111610 Installation Guide
5.2 Disassembling the Inverter
1. Disassemble the inverter as described in the installation guide of the inverter.
2. Disassemble the DC‑Disconnect as described in the installation guide of the inverter.
5.3 Disassembling the Installation Tray
1. Loosen the nuts on the wall mounting bracket of the inverter and remove with the washers.
2. Remove the wall mounting bracket.
3. Hold the installation tray with one hand and loosen
the screws.
4. Remove the installation tray.
Risk of fatal injury by electric shock when working on this inverter.
The inverter works internally with high voltages.
• The disassembly of the inverter and the SMA DC‑Disconnect may only be carried out by
qualified personnel.
Risk of burning if hot enclosure parts are touched.
The enclosure of the inverter and the Flush‑Mount Kit may get hot during operation.
• Wait until the Flush‑Mount Kit and the enclosure of the inverter cool down before
disassembling the inverter.