SMA SB 2000HF-US Installation - Manual (Page 17)

SMA America, LLC Installation
Installation Guide FMK20-30HFUS-eng-IUS111610 17
4. Secure the installation tray to the upright profiles
with at least six screws and washers.
4.5 Attaching the Wall Mounting Bracket
1. Unscrew the three hexagon nuts and three washers
from the threaded bolts of the installation tray.
2. Insert the wall mounting bracket into the threaded
bolts of the installation tray.
3. Secure the wall mounting bracket with three
washers and three hexagon nuts. Tighten the nuts
with a torque of (6 Nm).
Tolerance compensation
If the distance between the upright profiles
exceeds the width of the installation tray, you
can place one or more washers between the
upright profiles and the installation tray. This
prevents the installation tray from moving.
Wall mounting bracket of the inverter
The wall mounting bracket is included in the inverter's scope of delivery.