SMA SB 2000HF-US Installation - Manual (Page 25)

SMA America, LLC Disassembly
Installation Guide FMK20-30HFUS-eng-IUS111610 25
5 Disassembly
5.1 Disassembling the Cover Frame
1. Disconnect the inverter as described in the installation guide of the inverter.
3. Hold the cover frame with one hand and loosen the
screws on the cover frame.
4. Remove the cover frame.
Risk of fatal injury by electric shock when working on this inverter.
The inverter works internally with high voltages.
• Disconnection of the inverter may only be performed by qualified personnel.
2.
Risk of burning if hot enclosure parts are touched.
The enclosure lid and the enclosure body of the inverter may get hot during operation.
• Wait until the enclosure of the inverter cools down before disassembling the cover frame.