SMA SB 2000HF-US Installation - Manual (Page 10)

Safety SMA America, LLC
10 FMK20-30HFUS-eng-IUS111610 Installation Guide
2 Safety
2.1 Appropriate Usage
The Flush‑Mount Kit is an accessory for the inverters SB2000HF-US, SB2500HF-US,
and SB3000HF-US. The Flush‑Mount Kit enables the inverter to be fixed between the posts of
lightweight walls. An installation depth of at least 3
9
⁄
16
in. (90 mm) is needed for the installation.
The Flush‑Mount Kit must only be used in accordance with these instructions. Any other application
can lead to personal injuries or damage to equipment.
2.2 Safety Instructions
Risk of fatal injury by electric shock when working on this inverter.
Any work on the inverter must only be carried out in the absence of voltage and in compliance with
the five safety rules.
• Disconnect.
• Ensure that the device cannot be reconnected.
• Ensure that no voltage is present in the system.
• Ground and short-circuit.
• Cover or shield any adjacent live parts.
Risk of fatal injury by proceeding incorrectly when working on this inverter.
• All work on the inverter must only be carried out as described in the installation guide.
• All safety instructions in the installation guide of the inverter and these instructions must be
observed.
• All work on the inverter may only be performed by qualified personnel.
Risk of crushing due to falling individual parts of the Flush‑Mount Kit.
• The weight of the individual parts must be a maximum of 7 lbs. (3 kg) during mounting.
• Always use both hands to lift individual parts of the Flush‑Mount Kit.