SMA SB 2000HF-US Installation - Manual (Page 24)

Installation SMA America, LLC
24 FMK20-30HFUS-eng-IUS111610 Installation Guide
4.8 Mounting the Cover Frame
1. Hold the cover frame on the inverter and the
installation tray in such a way that the guiding pins
fit into the intended holes on the installation tray.
2. Secure the cover frame to the upright profiles with
six countersunk bolts.
3. Remove the protective film from the cover frame.
Risk of fire due to inflammable objects behind the cover frame
• Before mounting the cover frame, remove any inflammable objects from the installation tray.
Selecting the screws
To secure the cover frame, you need six countersunk bolts with a maximum diameter of
1
⁄
6
in.
(4.5 mm). Select the length of the screw on the basis of the wall material.