SMA SUNNY DESIGN 3 User Manual
User manual sunny design 3 and sunny design web
This manual is related to the following products:
Table of contents
Document Outline
- 1 Information on this Document
- 2 Product Description
- 3 Installation
- 4 User Interface
- 5 Creating a Project
- 6 Operation
- 6.1 Starting Sunny Design and Selecting the Required Project Type
- 6.2 Entering Project Data
- 6.3 Defining the Load Profile
- 6.4 Configuring the Gensets
- 6.5 Configuring the PV System
- 6.6 Wire Sizing (Optional)
- 6.7 Determining Self-Consumption (Optional)
- 6.8 Plan System Monitoring (Optional)
- 6.9 Analyzing Efficiency (Optional)
- 6.10 Overview of Results
- 6.11 Creating the Project Documentation
- 6.12 Changing the Password for Sunny Design/Sunny Portal
- 6.13 Forgot Password?
- 6.14 Have Design Suggestions Displayed
- 6.15 Setting Criterion for Sorting the Design Suggestions
- 6.16 Setting the Method for Calculating Design Suggestions
- 6.17 Changing the Share of the Inverter Costs
- 6.18 Creating Your Own Load Profile
- 6.19 Deleting Own Load Profile
- 6.20 Importing Data from Sunny Design Desktop Version from Software Version 2
- 6.21 Synchronizing Sunny Design Desktop Version and Sunny Design Web
- 6.22 Performing an Update for Sunny Design Desktop Version
- 6.23 Entering Prices for PV Modules
- 6.24 Entering Prices for Inverters
- 6.25 Setting Own Currency
- 6.26 Displaying Deactivated Messages Again
- 6.27 Exiting Sunny Design
- 7 Glossary