SMA Wireless-Set485-01 - Manual (Page 27)

SMA Solar Technology AG Commissioning
Installation Guide WirelessSet485-IEN091511 27
7 Commissioning
Do not connect the power supply unit until the mounting and cabling of the Wireless-Set485-01 /
Wireless-Set485-02 is complete.
Connecting the RS485 Power Injector to the Power Supply
1. Plug the plug of the power supply unit into the
RS485 Power Injector.
2. Plug the power supply unit of the RS485 Power
Injector into a 230 V / 110 V plug socket.
The green Power LED on the RS485 Power Injector will
light up.
8 Decommissioning
1. Unplug the power supply units of the RS485 Power Injectors.
2. Remove the RS485 cable connections.
3. Disassemble the antenna, radio module and RS485 Power Injector.