SMA Wireless-Set485-01 - Manual (Page 10)

The Wireless-Set485-01 SMA Solar Technology AG
10 WirelessSet485-IEN091511 Installation Guide
3.4 Identification
3.4.1 Identification of the Radio Module
Identifying the Radio Module
You can identify the radio module with the help of the
type plate
(see figure below). The type plate can be found on the
back of the housing and includes the version (here "IRIS-
RS485-EXT-01) and the ID (here "0093323284").
Identifying the Plug Adapter
You can identify the plug adapter with the aid of the
labels (see figure on the right). The labels can be found
on the front and back of the plug adapter and include the
plug type (here "485IRISADAP-01") and the device
version (here "A1").
Distinguishing between Radio Module Pairs
A Wireless Set consists of two radio modules. You can
identify the radio module pair and the radio channel with
the aid of the label on the front of the radio module. For
both the radio modules in a set, the "pair" and the
"channel" on the type plate must correspond.
Type
Version