SMA Wireless-Set485-01 - Manual (Page 14)

Mounting SMA Solar Technology AG
14 WirelessSet485-IEN091511 Installation Guide
5. Screw the antenna hand-tight onto the cable (see
figure C).
6. Run the antenna cable to the location where you
intend to mount the radio module.
You have now successfully mounted the antenna.
4.2.2 Mounting the Radio Module
1. Mark two drill holes one above the other and
around 4 cm apart.
2. Drill holes (diameter: 6 mm) at the marked points
and insert dowels.
3. Attach the two mounting clamps to the wall using
the screw mounting holes provided.
4. Run the cable ties through the mounting clamps.
5. Attach the radio module using the cable ties.
You have successfully mounted the radio module.
NOTICE!
To prevent damage to the radio module, do not allow water to get into it.
The radio module is only suitable for indoor installation.
C