SMA Wireless-Set485-01 - Manual (Page 15)

SMA Solar Technology AG Mounting
Installation Guide WirelessSet485-IEN091511 15
4.2.3 Mounting the RS485 Power Injector
1. Hold the wall mounting bracket of the RS485
Power Injector to the wall and mark two drill holes.
2. Drill holes (diameter: 6 mm) at the marked points
and insert the dowels provided.
3. Attach the wall mounting bracket to the wall using
the two screws provided.
4. Slide the RS485 Power Injector onto the wall
mounting bracket from the right hand side.
5. Press the RS485 Power Injector onto the wall.
6. Push the RS485 Power Injector to the right until you
hear the lever click into place.
You have successfully mounted the RS485 Power
Injector.