SMA OPC SERVER - Manual (Page 20)

Configuration SMA Solar Technology AG
20 OPCServer-BEN100813 User Manual
Managing the Sunny WebBox list
You can manage the list via the [Add], [Edit], [Delete] and [Detect] buttons.
5.7.2 Adding a Sunny WebBox Device
1. Select the "Configuration of WebBox devices" tab.
2. Under "WebBox list" select the [Add] button.
☑ The "SMA OPC Server" window opens.
3. In the "Name" field, enter the name of the Sunny
WebBox under which the Sunny WebBox should
appear in the OPC Client.
You can select any name, but it should be unique
and cannot contain any special characters.
4. Enter the IP address or URL of the Sunny WebBox
in the "IP-address/URL" field.
5. In the "Port" field enter the port of the Sunny
WebBox, under which it is available. If no port
number is assigned, port 80 is selected by default.
Symbol Meaning
The namespace of the Sunny WebBox has been successfully detected.
The namespace of the Sunny WebBox has not been detected or an error has occurred
during detection (see section 9 ”Troubleshooting” (page 28)).
Button Meaning
[Add] Adds a new Sunny WebBox to the Sunny WebBox list.
[Edit] Edits the Sunny WebBox selected in the Sunny WebBox list.
[Delete] Deletes the selected Sunny WebBox from the Sunny WebBox list.
[Detect] Re-detects the namespace of the selected Sunny WebBox. This is how you
can detect individual Sunny WebBox devices (e.g., if their namespace has
been incorrectly detected or if a device in the PV plant has been replaced).
Requirements for Sunny WebBox devices
The SMA OPC Server can detect all Sunny WebBox devices with firmware version 1.46,
and later.
The Sunny WebBox devices to be detected by the SMA OPC Server must have been
commissioned and all devices of the PV plant must have been detected.