SMA OPC SERVER - Manual (Page 19)

SMA Solar Technology AG Configuration
User Manual OPCServer-BEN100813 19
5.6.2 Enabling XML-DA
1. Select the "OPC settings" tab.
2. Select "XML-DA".
☑ "XML-DA settings" can be edited.
3. In the "Http-Port" field, enter the port number of the XML service (default: 3000).
4. In the "XML-Url" field, enter the URL of the web service in the format "/XMLUrl/".
5. If necessary, adjust further settings in the configuration interface.
6. Select either [Apply] or [Ok] to save the settings.
☑ XML-DA is now activated.
5.7 Configuration of WebBox Devices
5.7.1 Sunny WebBox List
The "WebBox list" contains a list of all the Sunny WebBox devices from which the collected data is to
be made available via the OPC interface.
Sunny WebBox List Symbols
The symbol which appears in front of each Sunny WebBox included in the list tells you whether the
namespace of the device has been detected properly at least once. If the namespace of the Sunny
WebBox is changed after detection, the symbol will not reflect this change. Detect the namespace
again so that the changes are displayed.