SMA OPC SERVER - Manual (Page 16)

Configuration SMA Solar Technology AG
16 OPCServer-BEN100813 User Manual
In order to save the log file, proceed as follows:
1. Select the "Global Settings" tab.
2. Select a logging option in the "Logging" field. The following selections are possible:
3. Enter the target directory in which the log file should be saved.
4. If necessary, adjust further settings in the configuration interface.
5. Select either [Apply] or [Ok] in order to save the settings.
☑ The log file will be applied upon the next start-up of the SMA OPC Server.
5.6 OPC Settings
The SMA OPC Server is equipped with an OPC Data Access (DCOM-based) interface, via which it
makes the instantaneous and the parameter values of your PV plant available. You can also receive
the values in xml format via the OPC XML-DA interface.
The SMA OPC Server supports the following interfaces:
• OPC Data Access (DA) - Standard setting
• OPC XML-DA - optional
Logging type Meaning
No logging No log file will be saved.
Only Error(s) Only errors will be saved.
News flow Both errors and the communication flow with the Sunny WebBox devices will
be saved.
Data Errors, communication flow and data received by the SMA OPC Server will
be saved. Note that log files can be very large.