SMA SUNNY EXPLORER - Manual (Page 26)

5 User Interface SMA Solar Technology AG
26 Explorer-BA-en-17 User Manual
5.4.3 Settings
The tab Settings displays all parameters of the device selected in the system tree or the selected
system. Which parameters are displayed depends on the particular user group. All parameters are
summarized in groups (parameter groups) and subgroups.
Device View
If a device is selected in the system tree, you can modify the parameters of that device under the tab
Settings (see Section 6.6 "Changing Parameters", page 34).
System View
If you have selected the system in the system tree, you can modify the parameters for an entire device
class under the tab Settings (see Section 6.6 "Changing Parameters", page 34). All devices in the
device class are set to the new parameter value. If you click on the parameter group, the device
classes are displayed separately (e.g., PV inverters and communication products).
If different values are set for devices in the same device class, this is indicated in editing mode by an
empty field (A).
The different options are shown in drop-down lists. The number of devices set to each option is shown
in brackets (see (B) and (C)). By selecting and saving an option, all devices in this device class will
be set to this value.
Figure 4: Drop-down list Fan test (example)
With text fields, an empty field will appear in which you must enter the new value for all devices.