ShoreLand'r SL60T - Manual (Page 7)

Made in the USA Midwest Industries, Inc. Ida Grove, IA 51445 800.859.3028 0002998
Page 7 www.shorelandr.com REV 02/08/01
Mount the winch post assembly to the
tongue at a location that best fits your wa-
tercraft. Secure the winch post base
weldment (Ref#2) to the tongue using two
(2) 1/2” X 3-9/16” X 5” square u-bolts
(Ref#11) and four (4) 1/2” stainless steel
hex lock nuts with nylon inserts. Mount
the winch post angle tube weldment
(Ref#3) on the tongue tube at a height
that would best fit your watercraft using a
1/2” X 3-9/16” X 5” square u-bolt over the
flange as shown in the drawing. Place the
legs of the u-bolt into the clamp (Ref#21)
and secure with two (2) 1/2” stainless
steel hex lock nuts with nylon inserts.
Winch Post: