ShoreLand'r SL60T - Manual (Page 5)

Made in the USA Midwest Industries, Inc. Ida Grove, IA 51445 800.859.3028 0002998
Page 5 www.shorelandr.com REV 02/08/01
Mount the bunk assembly (Ref#2) onto the
bunk support weldment using two (2) 1/2”
X 1-1/2” carriage bolts (Ref#10) and secure
with two (2) 1/2” hex lock nuts with nylon
inserts. Mount the bunk support weldment
(Ref#3) into the bunk pivot base weldment
(Ref#5) using a 1/2” X 4-1/2” hex head bolt
(Ref#6) and secure with a 1/2” hex lock nut
with nylon insert (Ref#16). Repeat this pro-
cedure on the opposite side of the trailer.
Note: The bunk pivot base weldment is ad-
justable on the front cross. Loosen the 1/2”
u-bolts enough to move the bunk pivot base
weldment in or out on the front cross to a
location that best conforms to your water-
craft.
Rear Bunk Assembly: