ShoreLand'r SLB30BAL User Manual
Page 9
Midwest Industries, Inc. Ida Grove, IA 51445 800-859-3028
www.shorelandr.com
0004297
Page
9
of
11
2/09/2011
The front bracket is not attached to the bunk because the trailer can be adjusted to two
different lengths. Once the proper
position for the rear cross member is
determined, the front of the bunk can
now be attached to the bracket using
two- No. 10 x 1-1/4” self tapping screws.
The 3/8” bolts can be tightened but not
over tightened because the bunks
should be allowed to rotate slightly to
conform to the boat’s bottom.
Tire and Wheel Assemblies
Mount the tire and wheel assemblies using the 1/2” fine threaded tapered lug nuts provided.
Tighten to 80-90 ft/lb. of torque using the rotation pattern as shown in the ShoreLandr’s
Owners Manual.
Re-torque the lug nuts after 50 miles of driving and then periodically thereafter.
Refer to the tire side wall for correct tire pressure.