ShoreLand'r SLB30BAL - Manual (Page 7)

One Axle Brake Installation
Cut the tape securing the brake hose to the axle. Remove the
plastic plug from the bottom port in the brass block on the right
brake caliper. Thread in the male end of the brake hose and
tighten. Repeat the process on the other side of the trailer
removing the plastic cap from the side port on the left caliper.
Insert the threaded end of the brake hose and tighten. Remove
the plastic cap from the end of the frame brake hose. This brake
hose is located coming out of the black plastic tube in the side
frame by the axle. Uncoil the brake hose so that it can be routed
thru the brake line clip bracket. Thread the side frame brake hose
into the side port of the right caliper. Tighten. Place a grommet
around the brake hose and insert in the brake line clip to protect
the frame brake hose. NOTE: Bleeding of the system should be
done through the bleeder on the left caliper.
Fill the actuator reservoir with brake fluid and bleed the line per
the instructions in the Brake Manual. All bleeding of the system
should be done through the bleeder on the left caliper.
For bleeding instructions see the ShoreLand’r Disc Brake Manual.
DUAL AXLE BRAKE INSTALLATION
Cut the tape securing the brake hose to the axle. Remove the plastic plug from the bottom port
in the brass block on the right brake caliper. Thread the brake hose male end into the block
and tighten. Repeat the
process on the other side of the
trailer removing the plastic cap
from the side port on the left
caliper. Insert the threaded end
of the brake hose and tighten.
Attach the male/female brake
hose from the brake kit into the
side port on the brass block on
the right caliper. Attach the
brake hose from the axle to the
spring bracket with the brake
line clip bracket as shown.
Once the brake hose is secured
with the hose clips, locate the
brass tee connector. Screw the
male port of the tee into the
brake line hose. Tighten.
Connect the side frame brake
hose into the top port on the
tee. Connect the two axles
Midwest Industries, Inc. Ida Grove, IA 51445 800-859-3028 www.shorelandr.com 0004297
Page 7 of 11 2/09/2011