HEIDENHAIN TNC 640 (34059x-01) - Manual (Page 421)

HEIDENHAIN TNC 640 421
13.2 Basis F
unctions (Sof
tw
ar
e Option 50)
Tool data
You define turning-specific tool data in the turning tool table
TOOLTURN.TRN
.
The tool number saved in column T refers to the number of the turning
tool in TOOL.T. Geometry values such as L and R from TOOL.T are not
effective with turning tools.
In addition you must identify turning tools in the tool table TOOL.T as
turning tools. For this, in column TYP select the tool type TURN for
the appropriate tool. If you require additional geometric data for a tool
you can create further indexed tools for this.
The tool number in TOOLTURN.TRN must match the tool
number of the turning tool in TOOL.T. If you enter or copy
a new line you can then enter the corresponding number.
Below the table window the TNC displays dialog text, unit
specification and entry area for the specific input field.