HEIDENHAIN TNC 620 (73498x-01) ISO programming - Manual (Page 61)

HEIDENHAIN TNC 620 61
2.4 St
at
us disp
la
ys
2.4 Status displays
"General" status display
The general status display in the lower part of the screen informs you
of the current state of the machine tool. It is displayed automatically in
the following modes of operation:
„ Program Run, Single Block and Program Run, Full Sequence, except
if the screen layout is set to display graphics only, and
„ Positioning with Manual Data Input (MDI).
In the Manual mode and Electronic Handwheel mode the status
display appears in the large window.
Information in the status display
Symbol Meaning
Actual or nominal coordinates of the current position
Machine axes; the TNC displays auxiliary axes in
lower-case letters. The sequence and quantity of
displayed axes is determined by the machine tool
builder. Refer to your machine manual for more
information.
The displayed feed rate in inches corresponds to one
tenth of the effective value. Spindle speed S, feed
rate F and active M functions.
Program run started.
Axis is locked.
Axis can be moved with the handwheel.
Axes are moving under a basic rotation.
Axes are moving in a tilted working plane.
ACTL.
X Y Z
F S M