HEIDENHAIN TNC 620 (73498x-01) ISO programming - Manual (Page 41)

HEIDENHAIN TNC 620 41
1
.3 Pr
ogr
amming the first par
t
U Move the tool to workpiece depth: Press the orange
Y axis key and enter the value for the position to be
approached, e.g. -5. Confirm with the ENT key
U Confirm Radius comp.: RL/RR/no comp? by pressing
the ENT key: Do not activate the radius compensation
U Feed rate F=? Enter the positioning feed rate, e.g.
3000 mm/min and confirm with the ENT key
U Miscellaneous function M? Switch on the spindle and
coolant, e.g. M13. Confirm with the END key: The TNC
saves the entered positioning block
U Move to the contour: Define the rounding radius of
the approaching arc
U Machine the contour and move to contour point 2 : You
only need to enter the information that changes. In
other words, enter only the Y coordinate 95 and save
your entry with the END key
U Move to contour point 3 : Enter the X coordinate 95
and save your entry with the END key
U Define the chamfer at contour point 3 : Enter the
chamfer width 10 mm and save with the END key
U Move to contour point 4 : Enter the Y coordinate 5 and
save your entry with the END key
U Define the chamfer at contour point 4 : Enter the
chamfer width 20 mm and save with the END key
U Move to contour point 1 : Enter the X coordinate 5 and
save your entry with the END key
U Depart the contour: Define the rounding radius of the
departing arc
U Retract the tool: Press the orange axis key Z in order
to get clear in the tool axis, and enter the value for the
position to be approached, e.g. 250. Confirm with the
ENT key
U Confirm Radius comp.: RL/RR/no comp? by pressing
the ENT key: Do not activate the radius compensation
U Miscellaneous function M? Enter M2 to end the
program and confirm with the END key: The TNC
saves the entered positioning block
26
27
0