HEIDENHAIN ND 920 - Manual (Page 47)

47
Operating Parameters
P60.0 to P60.7 Activate switching range for EXT
connection and assign to the axes
2)
No switching range SWITCH OUT.0 OFF
Switching range for X axis SWITCH OUT.0 X
Switching range for Y axis SWITCH OUT.0 Y
Switching range for Z axis SWITCH OUT.0 Z
P61.0 to P61.7 Define switching range for EXT
connection
2)
Enter switching point (= display value): the switching range is
symmetrical about the display value 0.
Input range
( in millimeters ) : 0 to 99 999.999
P81.1 to P81.3 Encoder
Max. encoder signal 16 µA
pp ENCODER X 16µA
Max. encoder signal 40 µA
pp ENCODER X 40µA
P96 Measured value output with probing 2)
Measured value output active PROBE RS232 ON
Not active PROBE RS232 OFF
P97 Code for measured values 2)
ASCII character for identifying measured values for measured
value output with probing, contact or pulse
Input range: 0 to 127
No ASCII character 0
ASCII character from ASCII table 1 to 127
P98 Dialog language 1)
German DIALOG LANG. D
English DIALOG LANG. GB
French DIALOG LANG. F
Italian DIALOG LANG. I
Dutch DIALOG LANG. NL
Spanish DIALOG LANG. E
Danish DIALOG LANG. DK
Swedish DIALOG LANG. S
Czech DIALOG LANG. CZ
Japanese DIALOG LANG. J
1) User parameter
2) Only on units with RS-232-C/V.24 and EXT connection