Maintenance, Cleaning and storage – Polaris 2014 Ranger 800 EFI User Manual
Page 93

91
MAINTENANCE
Cleaning and Storage
Storage Tips
NOTICE: Starting the engine during the storage period will disturb the protective film created by
fogging and damage could occur. Never start the engine during the storage period.
Clean the Exterior
Make any necessary repairs and clean the vehicle as recommended. See page 90.
Stabilize the Fuel
1. Fill the fuel tank.
2. Add POLARIS Carbon Clean Fuel Treatment or POLARIS Fuel Stabilizer. Follow the
instructions on the container for the recommended amount. Carbon Clean removes water
from fuel systems, stabilizes fuel and removes carbon deposits from pistons, rings,
valves and exhaust systems.
3. Allow the engine to run for 15-20 minutes to allow the stabilizer to disperse through the
entire fuel delivery system.
Oil and Filter
Change the oil and filter. See page 64.
Air Filter / Air Box
1. Inspect and clean or replace the pre-cleaner and air filter. See page 76.
2. Clean the air box.
3. Drain the sediment tube.
- 2014 Ranger 800 EPS 2014 Ranger Crew 800 EFI 2014 Ranger 6x6 2016 Ranger 6x6 2015 Ranger 800 EFI 2015 Ranger 800 EPS 2015 Ranger 6X6 2013 Ranger 800 2013 Ranger 6x6 800 2013 Ranger Crew 800 2011 Ranger Diesel 2010 Ranger 4x4 2010 Ranger EV 2011 Ranger EV 2011 Polaris EV 2011 Polaris LSV 2011 Ranger 4x4 500 EFI 2011 Ranger Crew 500 EFI 2011 Ranger 400 2010 Ranger 400 HO 2010 Ranger XP 2010 Ranger HD 2010 Ranger 6x6 2010 Ranger Crew 2012 Ranger Diesel 2014 Ranger Diesel 2014 Ranger Crew Diesel 2011 Ranger XP 800 2011 Ranger 800 HD 2011 Ranger 800 6x6 2011 Ranger 800 Crew 2013 Ranger Diesel 2013 Ranger 500 Midsize 2013 Ranger Crew 500 2012 Ranger XP 800 2012 Ranger 800 HD 2012 Ranger 800 6x6 2012 Ranger 800 Crew 2013 Ranger XP 900