Features and controls, Cab nets – Polaris 2014 Ranger 800 EFI User Manual
Page 28

26
FEATURES AND CONTROLS
Cab Nets
Riding in this vehicle without using the cab nets (or doors, if equipped) increases the risk of
serious injury or death in the event of an accident or rollover. Cab nets (or doors) must be
used by both operator and passengers at all times. Make sure all latches are secure before
operating the vehicle.
Always inspect cab nets and latches for tightness, wear and damage before each use of the
vehicle. Use the strap adjusters to tighten any loose straps. Promptly replace worn or
damaged cab nets and latches with new cab nets and latches. Please see your authorized
POLARIS dealer.
Securing a Net
1. After entering the vehicle, insert the lower net rod
into the net mount on the floor. Make sure the ball at
the end of the rod is properly secured in the mount.
2. Connect the latch at the top edge of the net to the
receiver latch mounted on the front frame.
Opening a Net
1. To exit the vehicle, release the latch at the top front edge
of the cab net.
2. Rotate the net rearward and pull upward on the lower net
rod to remove it from the mount.
3. Allow the net to hang freely outside the vehicle while
dismounting.
Latch
Rod
Net Mount
- 2014 Ranger 800 EPS 2014 Ranger Crew 800 EFI 2014 Ranger 6x6 2016 Ranger 6x6 2015 Ranger 800 EFI 2015 Ranger 800 EPS 2015 Ranger 6X6 2013 Ranger 800 2013 Ranger 6x6 800 2013 Ranger Crew 800 2011 Ranger Diesel 2010 Ranger 4x4 2010 Ranger EV 2011 Ranger EV 2011 Polaris EV 2011 Polaris LSV 2011 Ranger 4x4 500 EFI 2011 Ranger Crew 500 EFI 2011 Ranger 400 2010 Ranger 400 HO 2010 Ranger XP 2010 Ranger HD 2010 Ranger 6x6 2010 Ranger Crew 2012 Ranger Diesel 2014 Ranger Diesel 2014 Ranger Crew Diesel 2011 Ranger XP 800 2011 Ranger 800 HD 2011 Ranger 800 6x6 2011 Ranger 800 Crew 2013 Ranger Diesel 2013 Ranger 500 Midsize 2013 Ranger Crew 500 2012 Ranger XP 800 2012 Ranger 800 HD 2012 Ranger 800 6x6 2012 Ranger 800 Crew 2013 Ranger XP 900