Polaris 2014 Ranger 800 EFI - Manual (Page 35)

33
FEATURES AND CONTROLS
Instrument Cluster
Rider Information Center
Engine Error Codes
The error screen displays only when the
CHECK ENGINE light is on or when it goes
on and off during one ignition cycle. Error
codes are not stored. When the key is turned
OFF, the code and message is lost, but will
reappear if the fault reoccurs after restarting the
engine.
If the CHECK ENGINE light illuminates,
retrieve the error codes from the display.
1. If the error codes are not displayed, use the
MODE button to toggle until “Ck ENG”
displays on the main line of the display.
2. Press and hold the MODE button to enter
the diagnostics code menu.
3. Record the three numbers displayed in the gear position, clock and odometer displays.
4. Press the MODE button to advance to the next error code.
5. Press and hold the MODE button to exit the diagnostics code menu.
6. See an authorized POLARIS dealer for code details and diagnosis.
Suspect Parameter
Number (SPN)
Error Code
Number (0-9)
Failure Mode Indicator (FMI)